상품상세정보

 

 

 

서스펜션의 움직임을 방해하지 않고 만료 각도를 조정!
RD-001 ASL 프론트 너클 용 알루미늄 너클 마개 Φ3.0mm / Φ3.5mm의 등장입니다!

발매 당시부터 호평을 받고있다 [RD-001 : ASL 프론트 너클] 완벽한 알루미늄 너클 마개가 등장합니다.
RWD 드리프트 자동차 주먹 스토퍼 (스티어링 마개)에서 최대 조각 각도를 조정하는 방식이 일반적이지만, 조각 각도를 최대로 할 때 M3의 세트 스크류를 사용하는 분도 많은 것이 아닐까요 .
M3 세트 스크류에서도 스토퍼 기능은 수행하지만 표면이 나사 모양이기 때문에, 최대 없음 각시 서스펜션의 움직임을 방해하게됩니다.

그런 때 활약하는 것이이 [알루미늄 너클 스토퍼]입니다!
M3 세트 스크류와 달리 요철이없는 표면으로되어 있기 때문에, 최대 없음 각시에서도 서스펜션의 움직임을 방해 할 수 없습니다.
또한 경량 알루미늄으로되어 있기 때문에, 철제 세트 스크류로 교체함으로써 경량화에도 효과를 발휘합니다.

라인업은 Φ3.0mm과 Φ3.5mm의 2 종류!
최대 조각 각을 실현하는 Φ3.0mm 외에도 약간만 꺼 각도를 억제하고 싶을 때 유용한 Φ3.5mm을 준비했습니다.
시판되고있는 Φ4.0mm는 만료 각도가 부족한 Φ3.0mm는 만료 각도가 너무 많다는 때는 Φ3.5mm이 위력을 발휘합니다!
현재 스토퍼로 M3 세트 스크류를 사용하고있는 분, Φ4.0mm의 마개보다 만료 각도를 늘리고 싶다고 생각하시는 분은 꼭 해봐.

<라인업>
◆ RD-003-30 : RD-001 ASL 프론트 너클 용 알루미늄 너클 스토퍼 (Φ3.0mm, 2 개입) ¥ 520 (세금 별도)
◆ RD-003-35 : RD-001 ASL 프론트 너클 용 알루미늄 제 너클 스토퍼 (Φ3.5mm, 2 개입) ¥ 520 (세금 별도)

<주요 치수>
◆ 나사 : M3 길이 4.5mm
◆ 받침대 부분 직경 : 5.5mm
◆ 받침대 밑면에서 선단까지의 길이 : 16mm
◆ 육각 구멍 치수 : 대변 1.5mm
※ RD-001 : ASL 프론트 너클에 적합 한 크기로되어 있습니다.
※ 타사 너클에 사용할 때는 위 치수를 잘 확인하신 후 구입하세요.

RD-003-30 / 35 [Aluminum knuckle stopper for RD-001 ASL Front Knuckle (Φ3.0mm / Φ3.5mm 2 pieces) ¥ 520 (excluding tax)

Adjust the angle of steering without interrupting the movement of the suspension !
Aluminum knuckle stopper Φ3.0mm / Φ3.5mm for RD-001 ASL Front Knuckle is now available!

RWD drift cars generally use a knuckle stopper (steering stopper) to adjust the maximum turning angle, but when maximizing the turning angle, many people use M3 set screws.
Even with the M3 set screw, the function of the stopper works, but the surface of the screw will hinder the movement of the suspension at the maximum turning angle .

This is where the [Aluminum Knuckle Stopper] comes into play!
Unlike the M3 set screw, the surface has no irregularities, so it does not hinder the movement of the suspension even at the maximum turning angle .
Furthermore, since it is made of lightweight aluminum, it is also effective in reducing weight by replacing it with an iron set screw .

The lineup consists of a Φ3.0mm and Φ3.5mm diameter part .
In addition to Φ3.0mm which realizes the maximum steering angle , Φ3.5mm which is an option when you want to control the steering angle only slightly is prepared .
Φ3. 5mm is effective when the commercially available Φ4.0mm has insufficient steering angle and Φ3.0mm has too much angle !
If you are currently using an M3 set screw as a stopper or want to increase the steering angle more than a φ4.0mm stopper , please try it.

<Lineup>
◆ RD-003-30 : Aluminum knuckle stopper for RD-001 ASL Front Knuckle (Φ3.0mm 2 pieces) ¥ 520 (excluding tax)
◆ RD-003-35 : Aluminum knuckle stopper for RD-001 ASL Front Knuckle (Φ3.5mm 2 pieces) ¥ 520 (excluding tax)

<Main dimensions>
◆ Screw : M3, length 4.5mm
◆ Pedestal diameter : 5.5mm
◆ Length from base to tip : 16mm
◆ Hexagonal hole dimensions : 1.5mm across flats
* Above dimensions are suitable for RD-001 ASL Front Knuckle.
* If you use for the other knuckles, please check the dimensions of the knuckle, wheel before purchasing.

상품결제정보

We accept the following forms of payment:
- Credit Card
  - Visa
  - MasterCard
  - American Express
  - Discover
- PayPal

배송정보

• 배송 방법 : Parcel Service
• 배송 지역 : A Region.
• 배송 비용 : International Shipping Fee
• 배송 기간 : 7 - 14 days
• 배송 안내 : Please take into consideration that some products may take additional time for delivery and processing.
  Important: Your order is shipped once your payment has been cleared. Please contact our customer service center if you would like to request an exchange or return on your order.
  
  - Customs and Duties
  
  The recipient will be held responsible for international shipments which may be subject to import duties and taxes. Please be advised that these charges are levied by the destination country and we do not have control over them. In the case that the recipient refuses to receive the parcel, the order will be returned to Korea and will not be re-shipped. Relevant expenses (round-trip shipping, customs, etc.) will be deducted from the refund.
  

교환 및 반품정보

1. Address for returns and exchanges:
- [14491] 3rd floor Rccapro, 25, Sudo-ro 105beon-gil, Bucheon-si, Gyeonggi-do, Republic of Korea

2. Requirements:

Please take into consideration that we only accept qualifying returns but not exchanges. Refunds are issued once the returned products clear our inspection.

1) An item is eligible for cancellation if:
-you posted a Return request within 24 hours of payment and your order is still under “Pending” status (if your order is under “Preparing Shipment” status, please contact our customer service center) or
-the order is delayed for more than 10 days since payment and you have not received any notification regarding the delay; or
-the ordered item is out of stock.

2) We accept return(s) if:

-you receive a product different from your order; or

-you receive a defective product.

**Return Instructions

(1) Post a return request on our Return forum within three days of receipt. You are required to attach the photos of the received product(s) and include the item code, the order number, and the reason for the return.

(2) A customer service representative will be in contact to assist you by email or phone.

(3) Items returned must be in their original condition, which includes tags and any packaging. Also, you need to include a note of your order number, name, and user ID.

*Please be advised that returns are accepted ONLY IF you followed the instructions above and your return request has been approved by our staff. Returns that are shipped to us without any prior consent are not accepted.

*Please note that EVEN the defective/incorrect item(s) must be returned with all of the tags and labels intact. The item(s) must be sent in their original packaging and unworn.

*Please include all contents of the original package and free gifts (if applicable) in your return packaging.

* Shipping fee for any return caused by our fault will be paid by the company. However, if EMS’ cash on delivery is not possible then you can scan the return receipt and either mail it with the item to return or post an image of it on the forum. The shipping fee will be refunded once the returned item has arrived.

3) We do not accept return(s) if:

-you are returning the items just because you changed your mind (on size, color, etc.)
-you are returning shoes, bags, or any other accessories
-the products are damaged due to your mishandling
-your return request is not approved by our staff

The following items are not considered defective:

* Items that are originally manufactured without tags or labels
* Items with creases that may have been made while shipping
* Items with unsatisfactory/incomplete finish due to mass production

4) If there is a missing item from your order:

*Contact our customer service center by phone or by forum (if you cannot reach us by phone) within 1 day of delivery.
*Please keep all contents of the original package including packaging material (boxes, plastic bags etc.) with you until you are instructed otherwise.

Please note that we may not be able to process the refund for your missing item if you lose or damage any packaging material.

서비스문의

1800-4785 궁금하신사항은 전화주시면 친절하게 상담하여 드리겟습니다. 언제나 즐거운 인생 되시길 진심으로 꼭 바랍니다. 감사합니다..